Maniac Series - Black Hole USA UV Stickers

Features:

• Superior Adhesive Strength – Our new UV sticker provides exceptional sticking power, ensuring it stays securely in place on laptops, water bottles, car windows, boats, and more.
• Long-Lasting Durability – Built with advanced technology, this sticker offers outstanding resilience and strong adhesion, making it perfect for extended use.
• Bold, Fade-Resistant Colors – Using high-quality printing, our UV sticker maintains rich, vibrant colors that withstand sun exposure and harsh weather conditions.
• Weatherproof & Waterproof – Designed to endure the elements, this sticker keeps your designs sharp and intact in any environment.
• Care Instructions – For maximum longevity, hand washing is recommended.

Pressing Instructions:

1. Surface Preparation & Pre-Squeegee Process

• Clean the Surface: Before applying the sticker, clean the area using soap and water or a 50/50 mix of rubbing alcohol and water. A clean surface enhances adhesion and helps the sticker withstand environmental factors, washing, and general wear. While the sticker will adhere without this step, cleaning is highly recommended.

• Pre-Squeegee: Once the sticker is cut out, place it face down with the white side facing up. Using the padded end of the included squeegee, apply firm pressure while running it back and forth 2–4 times over the design. For thinner or separated elements (like small text), apply extra pressure and repeat as needed.

2. Preparing the Sticker for Transfer

• Slowly peel the two sheets apart, ensuring the entire design lifts onto the top carrier sheet.

• For designs with thin lines or small separated elements, peel even more carefully. If any portion doesn’t lift, re-squeegee from the back and try peeling again from a different angle. With experience, this process will become more intuitive.

3. Applying the Sticker to Your Item

• Identify the placement area before applying the sticker.

• For larger designs, you may find it easier to apply the sticker from one side to the other. This method improves accuracy, reduces air bubbles, and prevents wrinkles in the carrier sheet that could misalign or overlap design elements. Tip: Leave one corner of the carrier sheet unpressed for easy peeling later.

4. Finalizing the Transfer

• Once the sticker is placed, firmly squeegee it 2–4 times for proper adhesion.

• Peel slowly, watching to ensure all elements stick securely.

• If any part does not adhere properly, lay the carrier sheet back down, re-squeegee the area, and peel from a different angle.

Black Hole USA UV Stickers

Length: 9"

Features:

• Superior Adhesive Strength – Our new UV sticker provides exceptional sticking power, ensuring it stays securely in place on laptops, water bottles, car windows, boats, and more.
• Long-Lasting Durability – Built with advanced technology, this sticker offers outstanding resilience and strong adhesion, making it perfect for extended use.
• Bold, Fade-Resistant Colors – Using high-quality printing, our UV sticker maintains rich, vibrant colors that withstand sun exposure and harsh weather conditions.
• Weatherproof & Waterproof – Designed to endure the elements, this sticker keeps your designs sharp and intact in any environment.
• Care Instructions – For maximum longevity, hand washing is recommended.

Pressing Instructions:

1. Surface Preparation & Pre-Squeegee Process

• Clean the Surface: Before applying the sticker, clean the area using soap and water or a 50/50 mix of rubbing alcohol and water. A clean surface enhances adhesion and helps the sticker withstand environmental factors, washing, and general wear. While the sticker will adhere without this step, cleaning is highly recommended.

• Pre-Squeegee: Once the sticker is cut out, place it face down with the white side facing up. Using the padded end of the included squeegee, apply firm pressure while running it back and forth 2–4 times over the design. For thinner or separated elements (like small text), apply extra pressure and repeat as needed.

2. Preparing the Sticker for Transfer

• Slowly peel the two sheets apart, ensuring the entire design lifts onto the top carrier sheet.

• For designs with thin lines or small separated elements, peel even more carefully. If any portion doesn’t lift, re-squeegee from the back and try peeling again from a different angle. With experience, this process will become more intuitive.

3. Applying the Sticker to Your Item

• Identify the placement area before applying the sticker.

• For larger designs, you may find it easier to apply the sticker from one side to the other. This method improves accuracy, reduces air bubbles, and prevents wrinkles in the carrier sheet that could misalign or overlap design elements. Tip: Leave one corner of the carrier sheet unpressed for easy peeling later.

4. Finalizing the Transfer

• Once the sticker is placed, firmly squeegee it 2–4 times for proper adhesion.

• Peel slowly, watching to ensure all elements stick securely.

• If any part does not adhere properly, lay the carrier sheet back down, re-squeegee the area, and peel from a different angle.

Black Hole USA 9" Stickers: